Tag Archives: oil

Service interval reset Skoda Octavia

Leave a reply

For oil press and hold the right hand button on the cluster – oil will appear in the display – release right hand button then turn left hand button clockwise until —– appears.

For insp prees and hold right hand button – turn on ignition – release button then press and release button again – insp will appear in the display – turn left hand button as before until —– appears.

note: if you’re clearing the insp service sometimes it’s neccessary to clear the oil service afterwards (if it wasn’t done at oil service)

Oil service light reset indicator Chevrolet Cobalt 2004-2010

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Cobalt 2004-2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Cobalt, oil reset instructions:

2005-2010

Turn the ignition to run (one position before starting engine).
Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu.
Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service light reset indicator for BMW X3

Leave a reply

Reset service light indicator, engine oil life BMW X3 reset instructions:

1. Get in the driver seat and close the door.
2. Press and hold “S/R” button (on the left).
3. While still holding on “S/R” button, insert and turn your key on but DO NOT start the car.
4. Keep on holding till “RESET” appears.
5. Release “S/R” button and press and hold it again till “RESET” starts flashing.
6. Release “S/R” button and press once(without holding) again.
5. You should see 15500 miles to go

Might have to do it a couple of times before you get, though.

Good luck.

How to Reset the “MAINT REQD” Light on Toyota Sienna

Leave a reply

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

How to Reset the "MAINT REQD" Light on Toyota Sienna

Leave a reply

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.