Vehicles on fixed interval servicing can be reset as follows
Press and hold button “A” (positioned right of trip recorder display)
Switch ignition ON
The word “SERVICE” will appear in the trip recorder display
Release button “A”
Turn button “B” (positioned left of trip recorder display) to the right to reset the display
Switch ignition OFF
This applies to fixed service intervals only appearently
Button “A” is the trip reset
Button “B” is the clock set
Service light reset is as follows:-
1. Press and Hold the Odometer knob in
2. Turn the ignition on (do not start the car though)
3. Turn the odometer knob to the right and hold for about 5 secs.
4. Release odometer knob and switch ignition off.
5. Start car, Service indicator should now be gone.== Answer ==
cheers for the info worked first time probably saved me a few quid putting the car to a dealers.
ta much!
this worked on a 2000 modal with out a problem
How do you reset maintenance light, reset service light indicator vauxhall signum, year 2004. For reset maintenance light and that can be made manually by use button on car dashboard.
Reset service light indicator, engine oil life vauxhall signum 04, oil reset instructions:
Considering it’s made by a GM company, I would assume the standard practice here works there…
Turn key to on, but do not start…
Pump gas peddle three times…
Press and hold brake peddle till the service light blinks and then goes out…
Start the car to make sure the light was reset…
Or…
Turn to on…
Hold trip reset button…
Start car
keep holding trip reset till the light on the dash goes out…
Hopefully one of those works, but they’re just kinda the ‘try this’ until someone who knows chimes in.
How do you reset maintenance light, reset service light indicator Vauxhall Opel Signum/Vectra. For reset maintenance light and that can be made manually by use button on car dashboard.
Reset service light indicator, engine oil life Vauxhall Opel Signum/Vectra, oil reset instructions:
Is there a way to reset the service light on a 55 plate Vauxhall Signum 1.9 cdti design without going to a VX Dealer
Turn on Ignition to confirm
I second that, as I was shown how to do it. Follow it, VEry simple instructions.
Have your key in the ignition, but off. Well make sure its at trip A before you start this.
Next, press the button, but leave it pressed….
Now put the car into the “on” position….
The indicator will show a bar like it was counting down, wait till that finishes and it all starts to show 0000miles or whatever it is. And let go.
Your done.