Tag Archives: ignition

Reset service light 2007 seat leon

Service light reset is as follows:-

1. Press and Hold the Odometer knob in
2. Turn the ignition on (do not start the car though)
3. Turn the odometer knob to the right and hold for about 5 secs.
4. Release odometer knob and switch ignition off.
5. Start car, Service indicator should now be gone.== Answer ==
cheers for the info worked first time probably saved me a few quid putting the car to a dealers.
ta much!

this worked on a 2000 modal with out a problem

Reset service indicator citroen piccaso

Reset service light indicator, engine oil life citroen piccaso reset instructions:

To reset the service light on your vehicle is a straight forward procedure. Ignition off , Hold down the left dash button with the 000 s on . Whilst holding the button turn on the ignition and watch the display count down to 0 . Turn ignition off then on again and there you have it. Magic. Obviously this should be done in conjunction with a routine service to insure your car is safe reliable and legal .

Reset service light toyota yaris

I second that, as I was shown how to do it. Follow it, VEry simple instructions.

Have your key in the ignition, but off. Well make sure its at trip A before you start this.

Next, press the button, but leave it pressed….
Now put the car into the “on” position….
The indicator will show a bar like it was counting down, wait till that finishes and it all starts to show 0000miles or whatever it is. And let go.

Your done.

How to Reset the “MAINT REQD” Light on Toyota Sienna

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

How to Reset the "MAINT REQD" Light on Toyota Sienna

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.