Reset service light indicator, engine oil life Range Rover sport, year 2007 reset instructions:
turn off the car’s ignition.
Hold down the reset button on the dash board to zero the mileage.
keep it held in.
turn the car’s ignition on – but do not start.
keep the button in for 5 seconds.
a menu will come up – like date/mileage.
let go and then press the button again.
it will toggle through some options – then get to ‘rst’
press the button again, and your done
There’s no great ”trade secret” as to how to reset the service indicator lamp on most VW’s, simply refer to pages in the Owner’s Handbook!
For reference of those interested in such matters, but who might not have access to an owner’s manual, this is the procedure to follow:
Note: the Service Reminder Indicator displays 3 messages: OEL, IN 01, and IN 02. These display to alert the driver to follow the items listed under the manufacturer’s service interval.
To reset the message displays, turn the ignition switch on. Press and hold the odometer reset button “A” located below the speedometer. Turn off the ignition while holding the button. “OEL” will display on the indicator. Press and hold the lower digital clock reset button “B” until five dashes appear in the display. If needed, press the odometer reset button until “IN 01” appears and then press the clock reset button until five dashes appear. If needed, press the odometer reset button until “IN 02” is displayed and then press the clock reset button until five dashes appear.
To exit reset mode, turn the ignition switch on and when “IN 01” appears, turn the ignition switch off.
On sum golfs you have to turn the milage odometer
To the best of my knowledge, the above service light reset procedure applicable to most Volkswagens
Page 52 of the Owner’s Manual gives the answer to this:
1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.
2. Switch on the ignition and release the reset button, one of the service events appear in the display.
3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.
4. When the particular service event is displayed, turn the button for setting the digital clock to the right, “service—” appears in the display.
5. Switch off the ignition. Only now is the service event reset.
Page 52 of the Owner’s Manual gives the answer to this:
1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.
2. Switch on the ignition and release the reset button, one of the service events appear in the display.
3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.
4. When the particular service event is displayed, turn the button for setting the digital clock to the right, “service—” appears in the display.
5. Switch off the ignition. Only now is the service event reset.
How do you reset maintenance light, reset service light indicator Chevrolet Cobalt 2004-2010. For reset maintenance light and that can be made manually by use button on car dash board.
Reset service light indicator, engine oil life Chevrolet Cobalt, oil reset instructions:
2005-2010
Turn the ignition to run (one position before starting engine).
Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu.
Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.