Tag Archives: trip reset button

Service Light Reset indicator Citroen Xsara Picasso

Leave a reply

Reset service light indicator, engine oil life Citroen Xsara Picasso reset instructions:

How to Reset the Service Light Citroen Xsara Picasso

Recently I have had a few requests for Citroen Xsara Picasso Service Light Reset information from people who service their own vehicles.

Being a mobile mechanic and auto diagnostic specialist I could use the stock answer and say “I’ll have to plug it in for you”.

As you have no doubt seen through my other posts I do not believe in making things difficult for the home mechanic.
Here is the procedure:

Sit in drivers seat ignition off and handbrake applied.

Press and hold trip reset button.

Turn key to position two (ignition lights on engine not started).

Keeping the trip reset button pressed in you will notice your trip meter counting down.

When zero (0) is reached start the car and the service light (spanner symbol) should now be extinguished.

Please only use this information after your vehicle has been serviced

Reset oil service light 2008 seat ibiza

Leave a reply

Try This

Press and hold the trip reset button.
Turn on the ignition while still holding the trip reset button you will hear the normal beeping noise.
Hold trip reset button until the service tool (little spanner) disappears and 3 dashes appear (- – -).
You can now release the button and the service interval/oil change light is reset

Reset the service indicator on SEAT Altea 1.9 DTi

Leave a reply

1. Press and Hold the trip reset button in
2. Turn on the ignition on (do not start the car though)
3. Turn the trip button to the right and hold for about 5 secs.
4. Release the trip button and switch ignition off.
5. Start car, Service indicator should now be gone

Oil service reset Saturn Ion

Leave a reply

2004-2007

Turn the ignition to run (one position before starting engine).
Press and release the trip/reset button until the OIL LIFE message is displayed.
Then press and hold the trip/reset button until a chime sounds 5 times, and RESET is displayed in the message centre. When the system is reset, the odometer will again be displayed in the message centre.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Land Rover Range Rover

Leave a reply

2005-2009

Manual Reset Procedure:
Press and hold the trip reset button.
Turn the ignition switch on to the ignition position II (one position before starting engine).
If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly. If the SII function is not enabled the information display will show the normal odometer and trip information.
If the trip reset button is released within 10 seconds of entering the reset mode, the information display will show ‘DIST’. If the trip reset button is not released after 10 seconds the instrument cluster will exit the manual reset procedure.
If the oil service value is to be reset, press the trip reset button within 10 seconds for 5 seconds and then reset the oil service value, the display will then show ‘END’.
If the trip reset button is pressed for 5 seconds the display will exit the reset routine. If the trip reset button is not pressed for more than 10 seconds, then the information display will exit the reset routine. Turn the ignition off and then start the engine to verify the indicator has been reset.