Tag Archives: time

Oil service light reset indicator 2006 Volvo XC90, 2006

Leave a reply

Reset service interval display, insp and oil service for Volvo XC90, 2006, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Volvo XC90, oil reset instructions:

“Resetting the service reminder indicator (SRI), model years 2002-
The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The text message is displayed for 120s each time the ignition is switched on.
Proceed as follows to reset the service reminder indicator (SRI):

1.Ignition position I
2. Press and hold in the reset button for the trip odometer
3. Ignition position II. Note! Turn the key to position II within 2 seconds
4. Hold the reset button for the trip meter pressed in until the original value has been reset. Note! For all vehicles from the 2003 model year a general yellow lamp will light when the reset button must be released
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded
6. If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.

Note! If the reset button for the trip odometer is not released within 4 seconds, the service reminder indicator (SRI) is not reset.”

Reset maintenance light on dodge sprinter

Leave a reply

Reset service light indicator, engine oil life dodge sprinter, oil reset instructions:

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51”
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Reset oil service light indicator Alfa Romeo 156

Leave a reply

Reset service light indicator, engine oil life Alfa Romeo 156 (2.5), year 1999 to 2006 oil reset instructions:

service light indicator Alfa Romeo 156Switch ignition ON.

Press INFO button until service information is displayed.

Press and hold buttons [A] and [B] for at least 9 seconds.

The service time and distance will be reset.

Switch ignition OFF.

Reset computer after oil change on 2006 bmw 325xi

Leave a reply

Turn the car on. Wait about a minute for the computer to get to normal.
press and hold the travel mile reset button. Hold it untill an ! in a triangle appears. then your maintanance info will pop up. select the item to reset. and tap the side button on the wand atached to the stearing wheel. this button is what you use to browse through your computer. press the button once it will say “reset” press and hold it the second time and it will say reset, hold for 5 seconds or so and it will show a check mark next to “reset” confirming it has reset.

Reset the '07 Porche 911 Carrera Oil Change

Leave a reply

Instructions

1. Push inward on the trip odometer reset button and turn the key to the auxiliary position (forward one click from the off position) until “Oil Service Re” or “Oil Service Reset” appears on the odometer screen.

2. Press the odometer reset button a second time until the work “Reset” or “Re” appears on the screen. The word will continuously flash.

3. Press the odometer reset button quickly to complete the reset. “End SIA” appears to indicate a successful reset of the system.