Tag Archives: the service

Reset the Service Indicator Light on a Fiat Grande Punto

Reset service light indicator, engine oil life Fiat Grande Punto, oil reset instructions:

1. Turn the ignition switch to the “On” position without starting the engine.

2. Press the odometer reset button repeatedly until the total mileage is displayed.

3. Turn the ignition switch to “Off.”

4. Press and hold the trip odometer reset button.

5. Turn the ignition switch to “On.” Do not start the engine.

6. Release the trip odometer reset button after the service display counts down from 10 to 0 and the service light resets.

Service reset for 2007 Fiat Ducato

Reset service light indicator, engine oil life Fiat Ducato, year 2007, oil reset instructions:

Switch Ign on (do not start engine)
Set Odometer to read total miles.
Press Odometer Button (OB) until CFG1 appears in display
Release the OB.
Pressing the OB briefly will change between CFG1, CFG2, CFG3, CFG1
Once you have selected the CFG (see below).
Press the OB again for 5secs to store the new service frequency.
Turn off the ignition.

I selected CFG1 for my vehicle (05 Reg 2.8JTD), but you must decide yourself for your vehicle, should take 5mins to read this and carry out the resetting procedure

Note: If your vehicle is under warranty and you take it to be serviced by a Fiat dealer they will do this as part of the service.

CFG1 = 30000km (18,600mi) and 365 days in cases of Standard Use for 2.0 petrol and 2.8JTD versions, or in the case of Severe Use for the 2.3JTD versions.

CFG2 = 20000km (12,500mi) and 365 days in case of Standard Use for 2.0JTD versions, or in case of severe use for 2.0 petrol and 2.8JTD versions

CFG3 = 15000km (9,300mi) and 365 days in case of Severe Use for 2.0JTD versions

Reset service light indicator on a Fiat Stilo

How do you reset maintenance light, reset service light indicator Fiat Stilo. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Fiat Stilo, oil reset instructions:

1) Ensure ignition key is turned off.

2) Press and hold the odometer reset button whilst turning the ignition switch to the on position.

3) Keep the odometer reset button pressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset.

Rover 75 Reset Oil Service Light

Well after a small but required service on the car I had to reset the warning light. The real quick deal to reset all the requested lights on Rover 75 is to do the following

Get a small wire, Turn the key to second position, Short Pin 8 and Pin 4 on the OBD connector for “4 seconds to reset oil light”, “8-25 seconds for the other 2 lights” and this will reset the 15000 service request for oil change. Quick and easy and not legal if you do it without actually doing the service.

Reset the service light on a 2002 Rover 75

There are 3 stages
locate the obd plug and find pin 8 then
turn ignition to pos 2
with a fused wire ( a piece of wire with a fuse in it)
ground pin 8 for 4-5 seconds
turn ignition off
repeat this procedure 2 more times but for 8-12 seconds and then the service indicator will be reset.