Tag Archives: the service

Reset fill coolant fluid indicator Saab 9-3

Leave a reply

How to reset fill coolant fluid indicator Saab 9-3 first generation.

Reset fill coolant fluid indicator Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the vehicle.
  2. The fill coolant fluid indicator light cannot be removed by pressing CLEAR button.
  3. To reset this warning light push the brake pedal to clear.

Coolant Saab 9-3. The expansion tank is transparent, to facilitate checking. The level must be a little under the mark ”KALT – COLD” on the tank when the engine is cold. If the SID message “FILL COOLANT FLUID” is displayed, the level in the expansion tank should be checked. Top up as necessary with equal parts of clean water and coolant. Use only coolant approved by Saab. If the expansion tank is empty when coolant is added, run the engine to normal temperature and top up again, as necessary. All information how to reset fill coolant fluid indicator on a Saab 9-3 is taken from owners manual.

Coolant Saab 9-3. The cooling system is filled at the factory with coolant containing a 50% concentration of a combined antifreeze and corrosion inhibitor. A weaker mixture will result in reduced anticorrosion protection. For protection against freezing in very cold weather, a stronger concentration will be needed. A 60% concentration of antifreeze will provide protection at temperatures down to -58 F (-50°C). The corrosion-inhibiting properties of the coolant deteriorate over time, but coolant approved by Saab can be used for year-round protection. Change the coolant as specified in the service program (page 215) and use only coolant approved by Saab – other makes may need changing more frequently and may damage the system.

Oil reset service light indicator Saab 9-5 first generation

Leave a reply

How to reset service light indicator Saab 9-5 first generation.

Reset service light indicator Saab 9-5 first generation. From year: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009.

This message will be displayed approximately 600 miles (1,000 km) before the next scheduled service is due, or when 365 days have elapsed since the last service. The message should be cleared at the time of that service. If you have carried out the service, you can clear the message by yourself:

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the vehicle.
  2. Push and release CLEAR button.
  3. Push CLEAR and hold down the button for at least eight seconds.
  4. The word SERVICE will appear on the monitor after 2 bleeps.
  5. Switch ignition off.

Service intervals Saab 9-5 first generation. The maintenance schedule is comprised of a “First Service” at 1,000 miles (1,600 km), followed by services at very 10,000 miles (16,000 km) thereafter (10,000, 20,000, 30,000 miles/ 16,000, 32,000, 48,000 km, etc.).

Maintenance schedule Saab 9-5 first generation. The Maintenance Schedule prescribes a service program to the purchaser/operator of a Saab that is reasonable and necessary to ensure the proper emission control systems function, safety and reliability of the Saab automobile in normal use. Additional maintenance is recommended for specific components when the car is operated under certain severe conditions. Proper maintenance is always good advice! Authorized Saab dealers are equipped and trained to meet your Saab’s service needs. They regularly receive up-to-date Saab service manuals and parts and technical service bulletins from Saab and are able, through their franchise agreement, to attend Saab service schools, obtain Saab special tools and technical assistance and purchase riginal equipment service and replacement parts. Today’s complex automobiles should only be entrusted to the most knowledgeable service professionals. A Saab dealer is your best choice.

Oil reset service light indicator Opel Agila A

Leave a reply

How to reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

Reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF, the display in the instrument cluster must show the trip odometer.
  2. Press and hold trip odometer button.
  3. Turn on the ignition.
  4. Keep trip odometer button button pressed for at least 15 seconds longer until the service interval indicator changes.
  5. After approximately 15 seconds the display on the instrument cluster displays the symbol with the maximum mileage (km) and InSP for 2 seconds.
  6. After a successful reset, the message “- – – -” appears in the display until the actuating knob is released.
  7. Then the distance travelled or the time display appears again.

Oil reset service light indicator Skoda Fabia Mk1

Leave a reply

How to reset service light indicator Skoda Fabia Mk1.

Reset service light indicator Skoda Fabia Mk1. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

  1. With the ignition off, with all doors closed.
  2. Press and hold the button situated on the right of the dashboard, next to mileage (km/h)
  3. Turn the ignition to on, without starting the engine.
  4. Release the button and pressed again fore 1 second until the display shows service InSP message
  5. Rotat the same button to the right, until service – – – is displayed
  6. Now press again the button and that was it, the service interval has been reset.

 

Oil reset service light indicator Skoda Fabia Mk2

Leave a reply

How to reset service light indicator Skoda Fabia Mk2.

Reset service light indicator Skoda Fabia Mk2. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013.

oil-reset-service-light-indicator-Skoda-Fabia-Mk2 (1)

 

 

 

 

 

It is only possible to reset the Service Interval Display, if a service message or at least a pre-warning is shown in the instrument cluster display.

We recommend that this reset is completed by a specialist garage.

The specialist garage:

  • resets the memory of the display after the appropriate inspection;
  • adds an entry to the Service Schedule;
  • affix the sticker with the entry of the following service interval to the side of the dash panel on the driver’s side.

You can reset the service interval display by using the reset button 6 from the above picture.

On vehicles which are equipped with the information display, you can reset the service interval display in the menu Settings.

oil-reset-oil-service-light-Skoda-Fabia-Mk2 (1)

First read and observe the introductory information and safety warnings.

You can activate the Main menu by pressing the rocker switch A, formore than 1 second.

Individual menu points can be selected by means of the rocker switch A. When the pushbutton B is briefly pressed, the information you have selected is displayed.

The following information can be selected (depending on the equipment installed on the vehicle):

  • MFD
  • Audio
  • Navigation
  • Phone
  • Vehicle status
  • Settings

The menu points Audio and Navigation are only displayed when the factory-fitted radio or navigation system is switched on.

If warning messages are shown in the information display, these messages can be confirmed with the button B, on the windshield wiper lever in order to call up the main menu.

If the information display is not activated at that moment, the menu always shifts to one of the higher levels after 10 seconds.

Settings Skoda Fabia.

You can change certain settings by means of the information display. The current setting is shown on the information display in the respective menu at the top below the line.

The following information can be selected (depending on the equipment installed on the vehicle):

  • Language
  • MFD Data
  • Time
  • Winter tyres
  • Units
  • Alternative speed displayed
  • Service
  • Factory Setting
  • Back

After selecting the menu point Back you will reach one level higher in the menu.

Language
This is where the language in which the warning and information texts should be displayed can be set.

Displays of the MFA
This is where certain displays of the multi-functional indicator can be switched on or off.

Time
The time, time format (12 or 24 hour indicator) and the changeover between summer/winter time can be set here.

Winter tyres
This where the speed at which a warning signal should sound can be set. This function is, for example, used for winter tyres with which the permissible maximum speed is lower than the maximum speed of the vehicle.

When exceeding the speed, the following is shown on the information display:

Winter tyres: max. speed … km/h

Measures
The units for the temperature, consumption and distance driven can be set here.

Second speed
The display of the second speed in mph or in km/h can be switched on here1).

Service
Here you can have the remaining kilometres and days until the next service interval displayed, and reset the Service Interval Display.

Factory Setting
After selecting the menu Factory setting the factory setting of the information display is restored.

That it is the full procedure how to reset service light indicator Skoda Fabia Mk2. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Skoda cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.