Tag Archives: switch

Reset service light 2007 seat leon

Service light reset is as follows:-

1. Press and Hold the Odometer knob in
2. Turn the ignition on (do not start the car though)
3. Turn the odometer knob to the right and hold for about 5 secs.
4. Release odometer knob and switch ignition off.
5. Start car, Service indicator should now be gone.== Answer ==
cheers for the info worked first time probably saved me a few quid putting the car to a dealers.
ta much!

this worked on a 2000 modal with out a problem

Reset the service oil light on 9-3 and 9-5

Reset service light indicator, engine oil life Saab 9-3 and 9-5 reset instructions:

Resetting your service indicator on Saab 9-3 and 9-5 models is easy:

1. Switch Ignition on

2. Press and release “CLEAR” button

3. Press “CLEAR” and hold down button for at least 8 seconds.

4. The word “SERVICE” will appear in the display after 2 bleeps.

5. Switch ignition off…….

Congratulations, you have now reset your service interval.

Oil service light reset indicator Volvo

Reset service interval display, insp and oil service for Volvo, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Volvo, oil reset instructions:

Volvo 1999-2000 – S / V / C70 Models

Press and Hold odometer reset button
Turn ignition switch to “run” position
After SRL flashes, release odometer reset button
Turn ignition off
Turn ignition back on to confirm reset

Volvo 1998 – S80 Models

Turn ignition switch to position 1
Press and hold the odometer reset button
Turn ignition switch to position 2
Wait until service light blinks and then release odometer button

Volvo 1999-2000 – S80 Models

Turn ignition switch to position 1
Press and hold “day counter reset button”
Turn ignition switch to position 2
Continue holding day counter for approx. 10 seconds
After SRL flashes, release day counter button
Should hear “beep-beep” to confirm command accepted

Volvo 2001 – XC 70 Models

The following steps must be completed with no longer than 5 seconds between each step:
Make sure the trip meter is in T-1
Turn ignition key to position 1
Press and hold trip meter button until zero is shown
While still holding the trip meter, turn key to position 2
When original trip mileage returns, release the trip reset button
Turn key to off