1. Turn the ignition on without starting the engine.
2. Set the display window to ODO, TRIP.
3. Turn the ignition switch off.
4. Pressing the button PUSCH ODO TRIP reset switch turn the ignition switch to the ON position (keep pressing for at least 5 seconds).
5. Reset procedure is complete
1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown, turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000″ and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Reset service light indicator, engine oil life Chrysler Grand Cherokee, year 1995 , 1996 , 1997 , 1998 , 1999 , 2000 , 2002 , 2003 , 2004 , 2005 reset instructions:
1.Switch ignition on
2.Keep pushing the button that reads ‘step’ on the centre console untill the display shows the service interval.
3.Press the reset button for 3 seconds.
Reset service light indicator, engine oil life FIAT Scudo, oil reset instructions:
Think you press the trip bottom on the dash, whilst turning the ignition on, and hold it down for 10 seconds.
Reset service light indicator, engine oil life Fiat Grande Punto, oil reset instructions:
1. Turn the ignition switch to the “On” position without starting the engine.
2. Press the odometer reset button repeatedly until the total mileage is displayed.
3. Turn the ignition switch to “Off.”
4. Press and hold the trip odometer reset button.
5. Turn the ignition switch to “On.” Do not start the engine.
6. Release the trip odometer reset button after the service display counts down from 10 to 0 and the service light resets.