Tag Archives: SERVICE

Skoda Octavia II (2004 – ) – 07 1.8 Service Interval Display

Leave a reply

Page 52 of the Owner’s Manual gives the answer to this:

1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.

2. Switch on the ignition and release the reset button, one of the service events appear in the display.

3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.

4. When the particular service event is displayed, turn the button for setting the digital clock to the right, “service—” appears in the display.

5. Switch off the ignition. Only now is the service event reset.

How to Reset the Service Light on a Jeep

Leave a reply

Instructions

Things You’ll Need
Wrench
Ignition key
OBDl or ll scanner

1. Disconnect your battery cables from the battery posts with a 6-pt. closed wrench in the size appropriate for the battery bolts. Remove the negative (black) cable first. Leave the battery disconnected for several minutes, according to Allpar.com. Reconnect, this time starting with the positive cable, and crank the engine. The code should be gone.

2. Crank the Jeep. Drive it forward, then backwards, and shut off. Repeat this procedure three times. The codes should clear on the fourth crank.

3. Use a OBDl or OBDll scan tool. Plug the tool into your Jeep’s ALDL (Assembly Line Diagnostic Link), a small, rectangular electrical port usually located under the dash. Turn the key to the “on” position. Scan the computer for codes and select the option to clear the codes.

4. Wait for the code to clear itself automatically. Once the component is fixed, the check engine light disappears after several successful ignitions. The code is then stored for a while. If the engine continues to start and run without a re-occurrence of the original problem, the code is wiped out.

Oil service light reset indicator Chevrolet Cobalt 2004-2010

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Cobalt 2004-2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Cobalt, oil reset instructions:

2005-2010

Turn the ignition to run (one position before starting engine).
Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu.
Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service Light Reset Vauxhall Opel Signum/Vectra

Leave a reply

How do you reset maintenance light, reset service light indicator Vauxhall Opel Signum/Vectra. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Vauxhall Opel Signum/Vectra, oil reset instructions:

Is there a way to reset the service light on a 55 plate Vauxhall Signum 1.9 cdti design without going to a VX Dealer

  • Turn Ignition Off
  • Hold Trip Reset In
  • Turn Ignition On
  • Still Holding Trip Reset wait for three dashes
  • Turn off Ignition

Turn on Ignition to confirm

Service light reset indicator Ford focus 1.6 tdci 09

Leave a reply

Reset service light indicator, engine oil life Ford focus, year 2009 reset instructions:

This is how you do it on a MK4 Mondeo, worth a go:-

1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.