Tag Archives: Select

Service Light Reset SCION xB

Leave a reply

2004-2011

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2012

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip button for 5 seconds
4. The reset is complete when the MAINT REQ light turn off and the odometer indicates 0 and then returns to its regular display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service Light Reset SCION tC 2012

Leave a reply

2005-2012

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service SCION iQ 2012

Leave a reply

2012

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
“3. While pressing the trip meter reset button
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service light reset Toyota Cressida, Supra

Leave a reply

1986-88

When “CHECK ENGINE OIL” is displayed on the Super Monitor, press the “SELECT” button below the display until “ENGINE OIL” mode is displayed (unless it already is displayed). Then press and hold the “SET” button until “OK” is displayed.

Oil service reset Mercury Montego

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Montego, year 2005, 2006, 2007. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2005-2007

  • Turn the ignition to run (one position before starting engine).
  • Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
  • Press RESET control to reset oil change.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.