Reset service light indicator, engine oil life Honda Prelude, year 1982-2002 reset instructions:
1982-1989
Insert ignition key into slot below indicator flag at lower right corner of instrument cluster.
Push key in until indicator changes from red to green.
1990-1999
Insert ignition key into centre slot located on the front of the instrument cluster. When reset, the indicator changes to green.
2000-2002
Reset the coloured indicator by inserting your key in the slot beside the indicator.
Reset service light indicator, engine oil life Honda CRX, year 1984-1990 reset instructions:
1984-1990
Insert ignition key into slot below indicator flag at lower right corner of instrument cluster.
Push key in until indicator changes from red to green.
Reset service light indicator, engine oil life, dashboard oil life indicator Acura Integra, year: 1986-1990, instructions for manually resetting the trip computer:
Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to position 2 (do not start the engine).
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1991-1993
Reset the coloured indicator by inserting the key in the slot below the indicator.
1994-1995
Turn ignition to position 2 (do not start the engine).
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1996-2001
Turn ignition to position 2 (do not start the engine).
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service:
Switch ignition OFF.
Press and hold down the trip odometer reset button (at the lower right of the instrument cluster).
Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON.
The trip mileage area now displays “Service OIL”.
If trip odometer reset button is now pressed again, the display turns to “Service INSP”. Pressing the button again will cycle the display back to “Service OIL”.
When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to “Service —-“. That reminder is now reset.
The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again.
Switch ignition OFF and back ON to resume normal display.
For oil press and hold the right hand button on the cluster – oil will appear in the display – release right hand button then turn left hand button clockwise until —– appears.
For insp prees and hold right hand button – turn on ignition – release button then press and release button again – insp will appear in the display – turn left hand button as before until —– appears.
note: if you’re clearing the insp service sometimes it’s neccessary to clear the oil service afterwards (if it wasn’t done at oil service)