Tag Archives: position

Reset the Service Indicator Light on a Fiat Grande Punto

Leave a reply

Reset service light indicator, engine oil life Fiat Grande Punto, oil reset instructions:

1. Turn the ignition switch to the “On” position without starting the engine.

2. Press the odometer reset button repeatedly until the total mileage is displayed.

3. Turn the ignition switch to “Off.”

4. Press and hold the trip odometer reset button.

5. Turn the ignition switch to “On.” Do not start the engine.

6. Release the trip odometer reset button after the service display counts down from 10 to 0 and the service light resets.

Reset service light indicator on a Fiat Stilo

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat Stilo. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Fiat Stilo, oil reset instructions:

1) Ensure ignition key is turned off.

2) Press and hold the odometer reset button whilst turning the ignition switch to the on position.

3) Keep the odometer reset button pressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset.

Oil service light reset indicator Bentley Continental Fluying Spur

Leave a reply

Reset service interval display, insp and oil service for Bentley Continental Fluying Spur, 2004, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Bentley Continental Fluying Spur, year 2004- oil reset instructions:

The real repair is to have the vehicle serviced by a Bentley dealer. The other option is as follows…
Press and hold the trip button
While doing this, turn the ignition key into the on position
Let go of both, and you will see the words “service reset” on the drivers instrument panel screen
Now press the silver knurled roller switch “OK” on the right side of the steering wheel controls, by the menu button. This will confirm the request.

Rover 75 Reset Oil Service Light

Leave a reply

Well after a small but required service on the car I had to reset the warning light. The real quick deal to reset all the requested lights on Rover 75 is to do the following

Get a small wire, Turn the key to second position, Short Pin 8 and Pin 4 on the OBD connector for “4 seconds to reset oil light”, “8-25 seconds for the other 2 lights” and this will reset the 15000 service request for oil change. Quick and easy and not legal if you do it without actually doing the service.

Oil service light reset indicator 2006 Volvo XC90, 2006

Leave a reply

Reset service interval display, insp and oil service for Volvo XC90, 2006, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Volvo XC90, oil reset instructions:

“Resetting the service reminder indicator (SRI), model years 2002-
The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The text message is displayed for 120s each time the ignition is switched on.
Proceed as follows to reset the service reminder indicator (SRI):

1.Ignition position I
2. Press and hold in the reset button for the trip odometer
3. Ignition position II. Note! Turn the key to position II within 2 seconds
4. Hold the reset button for the trip meter pressed in until the original value has been reset. Note! For all vehicles from the 2003 model year a general yellow lamp will light when the reset button must be released
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded
6. If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.

Note! If the reset button for the trip odometer is not released within 4 seconds, the service reminder indicator (SRI) is not reset.”