Tag Archives: oil

Reset oil change light on a 2008 dodge nitro

1. Turn the ignition key to ON but do not start the engine.
2. Slowly depress the accelerator to the floor and release it three times within 10 seconds.
3. Turn the ignition key to the OFF position.

2010 Dodge Grand Caravan how to reset oil light

To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure:

  1. Turn the ignition switch to the ON position (Do not
    start the engine).
  2. Fully depress the accelerator pedal slowly three times
    within 10 seconds.
  3. Turn the ignition switch to the OFF/LOCK position.

*If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.

Reset maintenance light on dodge sprinter

Reset service light indicator, engine oil life dodge sprinter, oil reset instructions:

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51”
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Oil reset light service indicator Renault Scenic

How do you reset maintenance light, reset service light indicator Renault Scenic. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Scenic, oil reset instructions:

To reset the service indicator on the scenic II is as follows:
Scroll through the trip computer using the button on the end of the right hand stalk control until you get to the miles till service indicator (or the “change oil soon message” will appear if due)
Then press and hold the same button in and hold it. The miles indicator will then flash then change to 18000, keep the button pressed until the 18000 stops flashing.

NOTE: If the word “service” appears on your dash then that does NOT mean that a service is due. It is an indication that the vehicle is faulty and has a stored major fault code.

The indicator that a Service is due is when the words “change oil soon” appears or the spanner starts flashing.

Reset service light oil change interval on Renault Modus 1.5 dci

How do you reset maintenance light, reset service light indicator Renault Modus 1.5 dci. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Modus 1.5 dci, oil reset instructions:

Reset

//// go to oil substitute thuson press up arrow on wiper switch since a few seconds distance until next service appears. then it will reset back to 12000 miles hope this contribute tos modus 1.5 dci