Tag Archives: oil

Reset the Oil Life on My Suzuki XL7

Leave a reply

How do you reset maintenance light, reset service light indicator Suzuki XL7. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Suzuki XL7, oil reset instructions:

Instructions

1.Sit in the driver’s seat of the XL7. Insert the ignition key and turn it to “RUN.” Do not start the engine.

2.Press and release the gas pedal three times within five seconds. Watch for the engine oil light to flash, indicating that the system is reset.

3.Turn the key to “OFF” and remove it from the ignition.

Reset service light, maintance on Toyota Land Cruiser

Leave a reply

1. Turn your ignition key to the ‘ACC’ or ‘LOCK’ position.
2. Press and hold the trip meter reset nob (next to your Toyota Land Cruiser’s odometer).
3. While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Land Cruiser.
4. Hold the meter reset until the MAINT REQD light switches off.

If this procedure does not successfully reset your maintenance required light, make sure that your digital odometer is set with the odometer reading showing and try again. If the light is still lit, you can try disconnecting your Toyota Land Cruiser battery, causing the internal computer to reset. If you still haven’t successfully turned off the oil indicator MAINT REQD light, please read your manual or contact your dealer for further instruction!

Reset service light, maintance on Toyota Rav 4

Leave a reply

This Maintenance light is a reminder : “TIME FOR AN OIL CHANGE!”

1. Turn the ignition key to the ‘OFF’ position with the trip meter A reading shown.

2. Turn the ignition key to the ‘ON’ position while holding down the trip meter ‘RESET’ button.

3. Hold down the knob for at least 5 seconds. The odometer indicates ‘000000’ and the light goes off.

Service light indicator reset Fiat Scudo

Leave a reply

Reset service light indicator, engine oil life FIAT Scudo, oil reset instructions:

Think you press the trip bottom on the dash, whilst turning the ignition on, and hold it down for 10 seconds.

Reset the Service Indicator Light on a Fiat Grande Punto

Leave a reply

Reset service light indicator, engine oil life Fiat Grande Punto, oil reset instructions:

1. Turn the ignition switch to the “On” position without starting the engine.

2. Press the odometer reset button repeatedly until the total mileage is displayed.

3. Turn the ignition switch to “Off.”

4. Press and hold the trip odometer reset button.

5. Turn the ignition switch to “On.” Do not start the engine.

6. Release the trip odometer reset button after the service display counts down from 10 to 0 and the service light resets.