Tag Archives: Oil service interval

Reset service light oil life indicator dashboard Acura CSX

Reset service light indicator, engine oil life, dashboard oil life indicator Acura CSX, year: 2006-2010, instructions for manually resetting the trip computer:

  • Turn the ignition to position 2 (do not start the engine).
  • Press the SEL/RESET button on the steering wheel until you see the engine oil life display.
  • Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
  • Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Acura CL

Reset service light indicator, engine oil life, dashboard oil life indicator Acura CL, year: 1997-1998, instructions for manually resetting the trip computer:

Reset the coloured indicator by inserting the key in the slot below the indicator

1999-2003

Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
Hold the SELECT and RESET buttons until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.

How reset the service reminder indicator light Range Rover sport?

Reset service light indicator, engine oil life Range Rover sport, year 2007 reset instructions:
turn off the car’s ignition.

Hold down the reset button on the dash board to zero the mileage.

keep it held in.

turn the car’s ignition on – but do not start.

keep the button in for 5 seconds.

a menu will come up – like date/mileage.

let go and then press the button again.

it will toggle through some options – then get to ‘rst’

press the button again, and your done

Service Light Reset indicator for Citroen saxo, xsara

Reset service light indicator, engine oil life Citroen saxo, xsara reset instructions:

For reference of those interested in such matters, but who might not have access to an owner’s manual, this is the procedure to follow:

1) Ensure “ignition” key is turned off.
2) Depress and hold the
odometer reset button whilst turning the “ignition” switch to the on position.
3) Keep the odometer reset button depressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset.

Note 1: When reset, the service indicator is actually reset to 9,500 miles. The mileage that the car accumulates henceforth is subtracted from 9,500 miles, until 9,500 miles have elapsed at which point the service indicator icon will reappear inorder to warn the driver that the next service is imminent. Any mileage accumulated beyond 10,000 miles since the last reset will be indicated with a minus sign displayed infront of the mileage to indicate by how much a service is overdue.

Note 2: To the best of my knowledge, the above service light reset procedure applicable to most Peugeot cars, most Citroen cars and most Fiat cars with the exception of the Fiat Stilo. (Also applicable to car derrived vans from the above ranges).

How to replace the rear brake pads on my passat 2007?

solved the problem, i found a TSB explaing what to do when this happens, and than i found a realy good HOW TO.

Practicly you need to reset the hand brake cylinder by:

1. Disconect batery for 5 minutes (this means if your car is 2007> you will have to go to dealer so he can put the code for radio thru some GEKO system othervise you cant use the radio!)

2. Connect the batery.

3. Dont start the car only give contact (many lights go on )

4. pres and hold the brake while presing the hand brake 2 times on and 2 times off. (i waited 30 seconds betven “on” and “off” cause the manual i found wasnt very clear)

5. Than i pussehd the cylinder back with hands, (Be carful not to turn it!!!) only push it straight i did it by hand.

6. Put everything back, deleted the fault codes and started all over again like manual said on the previous post.

I did everything like it said but at the end i end up with P on the dash light up, than i only deleted the fault codes from controler 53 – Hand brake and it worked like a charm!