Tag Archives: oil life

Service light oil reset indicator Cadillac Fleetwood

Reset service light indicator, engine oil life Cadillac Fleetwood, year 1991-1996 reset instructions:

1991-1992

Turn the ignition to run (one position before starting engine).
Press RANGE and FUEL USED simultaneously to display oil life index.
Press RANGE and RESET simultaneously until the CHANGE OIL SOON light flashes (hold about 5 seconds).
The oil life index will not remain displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1993

Turn the ignition to run (one position before starting engine).
Reset the Engine Oil Life Index by pressing the RANGE and RESET keys on the Fuel Data Centre for 5 to 60 seconds.
Release the keys. The indicator will automatically reset to 100. The CHANGE OIL SOON light will flash 4 times to indicate it has been reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1994-1996

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, repeat steps).
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service light reset indicator Chevrolet Cobalt 2004-2010

How do you reset maintenance light, reset service light indicator Chevrolet Cobalt 2004-2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Cobalt, oil reset instructions:

2005-2010

Turn the ignition to run (one position before starting engine).
Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu.
Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.