Tag Archives: odometer

How to Reset the “MAINT REQD” Light on Toyota Sienna

Leave a reply

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Turn off the service light in a Renault Clio

Leave a reply

How do you reset maintenance light, reset service light indicator Renault Clio. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Clio, oil reset instructions:

First you press the odometer button then at the same time you put the key in “on” no engine running, wait for 30 secs aprox and it will be reset, repeat this steps for the oil light
what is the odometer button

Volkswagen Polo MK4 Service Light Reset

Leave a reply

Reset service light indicator, engine oil life Volkswagen Polo MK4, reset instructions:

Depending on your car/engine, it works it out as 10000miles or 12months, whichever comes first I think.
On a MkIV Golf you reset it like this:

1. Push and hold the odometer button.
2. Turn on ignition.
3. Turn digital clock button clockwise, and choose the service you want to reset.
4. Turn off ignition.

Your Service indicator should now have been reset.

I would imagine the above is the same on a Polo. If not, hopefully someone will come along to help!

Reset Service Light on a Volkswagen Polo

Leave a reply

Reset service light indicator, engine oil life Volkswagen Polo, year 1996-1999 reset instructions:

Polo 96-99
IN01 -inspection service

Switch ignition ON
Press and hold button (A left) under speedo
Switch ignition OFF
Release button
Press and release button A (left)
The letter “IN01” will appear in the odometer display of the speedometer.
Press clock minute button B until “—–” appears in the display
Press button A (left) to display “OEL”
Press button B to display “—–”
Switch ignition on until the letters “IN00” appear in the display

I have instructions for Oil service (OEL) and IN02 inspection service if this doesn’t work.

Toyota Tacoma reset service light

Leave a reply

1. To reset MAINT reminder light after engine oil replacement, turn ignition switch to OFF position with odometer showing ODOMETER READING. Turn ignition switch to ON position while holding down trip meter RESET button.

2. Hold trip meter RESET button down for at least 5 seconds until odometer indicates “000000” and MAINT reminder light goes out.