Tag Archives: light indicator

How to reset the service light on your Chevy Cavalier

Reset service light indicator, engine oil life Cadillac Cavalier, reset instructions:

1. Make sure the light is has a wrench icon. This article is not intended to help reset a “service engine” light.

2. Without turning on your car, turn the key to the right and you’ll see all of your dash lights come on.

3. Press on the brake 4 times. On the 4th time, hold the brake petal down for 30 seconds and release. This should reset the light.

4. Always always always contact your mechanic! This trick was told to me by my mechanic because I saw the light and took it in for servicing. I went to a non-dealer mechanic, but after they ran a diagnostic, they couldn’t find anything wrong. I called my GM mechanic and they suggested that if noting was found wrong, it was probably a light that needed to be reset. I plan to take it in for a tune-up soon but knowing that nothing serious was wrong was a nice weight off my shoulders and my wallet!

Service light reset indicator for BMW X3

Reset service light indicator, engine oil life BMW X3 reset instructions:

1. Get in the driver seat and close the door.
2. Press and hold “S/R” button (on the left).
3. While still holding on “S/R” button, insert and turn your key on but DO NOT start the car.
4. Keep on holding till “RESET” appears.
5. Release “S/R” button and press and hold it again till “RESET” starts flashing.
6. Release “S/R” button and press once(without holding) again.
5. You should see 15500 miles to go

Might have to do it a couple of times before you get, though.

Good luck.

Reset service indicator citroen piccaso

Reset service light indicator, engine oil life citroen piccaso reset instructions:

To reset the service light on your vehicle is a straight forward procedure. Ignition off , Hold down the left dash button with the 000 s on . Whilst holding the button turn on the ignition and watch the display count down to 0 . Turn ignition off then on again and there you have it. Magic. Obviously this should be done in conjunction with a routine service to insure your car is safe reliable and legal .

Reset the On-Board Computer for a 2003 Ford Fiesta

Reset service light indicator, engine oil life Ford Fiesta, year 2003 reset instructions:

1. Pull the hood release to open the hood. Prop it up with a rod and locate the battery under the hood.

2. Find the negative battery terminal. You will see a clamp with a nut on it. Loosen the nut with an adjustable wrench and slid the clamp off of the battery terminal.

3. Wrap a towel around the negative battery clamp and keep it away from the battery altogether. The towel will help to protect you and the battery.

4. Let the vehicle sit for about 15 minutes. This will allow the computer to reset and erase all trouble codes.

5. Discard the towel and put the negative battery clamp back onto the negative battery terminal. Tighten the nut with the wrench. Tuck the rod away and lower the hood of the car.

6. Put the key into the ignition and start the engine. Verify that all service and warning lights have turned off.

Service light reset indicator Ford focus 1.6 tdci 09

Reset service light indicator, engine oil life Ford focus, year 2009 reset instructions:

This is how you do it on a MK4 Mondeo, worth a go:-

1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.