Vehicles on fixed interval servicing can be reset as follows
Press and hold button “A” (positioned right of trip recorder display)
Switch ignition ON
The word “SERVICE” will appear in the trip recorder display
Release button “A”
Turn button “B” (positioned left of trip recorder display) to the right to reset the display
Switch ignition OFF
This applies to fixed service intervals only appearently
Button “A” is the trip reset
Button “B” is the clock set
Reset service light indicator, engine oil life Volkswagen Sharan, year 2001 reset instructions:
with the ignition off
press and hold the miles reset button in on dash
now turn on ignition and start engine
‘service now’ should now be displayed
now turn the clock adjuster button either left or right and this should rest the service
noification.
Reset service light indicator, engine oil life Mercedes Benz CLK 320, oil reset instructions:
Most models of the Mercedes-Benz CLK 320 are equipped with a service reminder system that displays a notification light on the control panel when service is due. The onboard computer tracks driving conditions to determine when to illuminate the service reminder light. The service technician at the Mercedes-Benz dealer or garage will reset the service light for you when he performs regular maintenance on the car. If you do your own maintenance, you can turn the light off yourself.
1. Turn the ignition switch on. Do not start the engine.
2. Press the information menu button on the left of the steering wheel repeatedly until the total mileage is displayed.
3. Press the up- or down-arrow button on the left of the steering wheel until the service light is displayed.
4. Press and hold the reset button until a confirmation message appears on the display. The reset button is located to the left of the odometer.
5. Press and release the reset button to confirm the reset. The service light turns off.
Reset service light indicator, engine oil life Volkswagen Crafter 2.5 td, reset instructions:
VW Crafter service reset Sitting in the drivers seat looking at the dash on the left hand side you have a M button and below it a 0 button these are the buttons you will need to use.
When i refer to the LCD this is the illuminated part in the middle that shows your mileage,service mileage and trip mileage.
Please read this fully first to get the jist of it as if you perform the actions too slow it wont work and you will have to start over.
1.Put on ignition
2.Wait for service mileage to revert to vehicle mileage
3.When it reverts to the vehicle mileage press and hold the 0 button until you hear a beep (can take up to 30 seconds)
4.As soon as you hear the beep press the M button repeatdly and you will see in the LCD display different reset’s the one you need to select is “reset 51” if you go past it just keep pressing the M button till it comes up again.
5.When the “reset 51” is displayed stop pressing the M button then press and hold the 0 button again until a number 2 is displayed in the LCD.
6.Release the 0 button and then press twice and it will say in the LCD reset done ,if it is not reset you will get a 30% power reduction after 2K miles
Reset service light indicator, engine oil life Audi A3 (year:1996-1999), Audi A4 (year:1994-2001), Audi A6 (year:1996-2000), oil reset instructions:
If the service is due on these vehicles, when the key is turned to position 2, one of the dashboard displays will show “Service INSP”, “INSP1” or “INSP2” for Fixed interval services, and “SERVICE OEL / OIL” for the Oil Service interval.
The oil service reset procedure is as follows:
Start with the ignition turned OFF
Press and hold the button on the right side of the display while turning the ignition on (position 2)
“Service OEL / OIL” should be displayed
Release the button on the right
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left
…then to access and reset the service information:
Push the button on the right briefly
“Service INSP” should show on the dash
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left
Turn off the ignition