Tag Archives: left

Oil Service Interval Reset – 02-06 MINIs

Leave a reply

Resetting Oil Service Light on your 2002 – 2006 Cooper and Cooper S Hatchbacks, and 2005 – 2008 Cooper and Cooper S Convertibles:

1) Press and hold the trip button
2) Insert key and turn to position 1
3) Watch for RESET to appear
4) Release the button, then press & hold it again
5) Wait for the RESET to flash
6) Release the button, and then press & release (once only)
7) Service interval should then be reset to next interval

If that didn’t work, try this:

1. Push the Trip Button
2. Turn ignition key to position 1 and 51A will appear to left of mileage
3. Release trip button
4. Wait 3 seconds
5. Push trip button
6. Wait (5-8 seconds) for RST to appear in left corner
7. Release trip button
8. Push trip button
9. 15000 will appear as new service interval
10. Release trip button

Or this:

1. Press and hold the trip odometer button.
2. Insert car key and turn it to the fi rst position (not the second position).
3. You will see 51A come up in the trip odometer area.
4. Release, then press and hold again.
5. Watch for the word “RST” to appear on the Odometer indicator.
6. Release, then press and hold again.
7. Wait for the “RST” message to fl ash.
8. Release, and then press & release (once only).

Reset Service Indicator of BMW 3 E46 Chassis

Leave a reply

Turn key switch ON or when start engine, the instrument panel will display “OIL Service” or“INSPECTION” and left distance for several seconds. If “Service” or“ INSPECTION” are lit all the time and the left distance is next to “0”? it indicates that it needs oil service reset.

Reset by manual :
1. Press RESET button in the left of instrument panel.
2. Turn key ON and to ACC position.
3. Waiting for the instrument displays “OIL Service” or “INSPECTION” is flashed.
4 Release RESET button, then press five seconds, the screen will display RESR or RE is flashed. Release RESET button again and press again till the screen displays “25000km”. Now reset is completed.

When you find there is “-“symbol in front of the left distance number in the screen, and you can’t do reset with the above method, now you can use X-431 to reset oil service.

Reset the service light on a mini cooper 2007

Leave a reply

Service Reset:

1)Push-hold Trip Button (TB)
2)Turn key to position 1
3)Continue to hold (TB), the number 15A will show to the teft of the milage
4)Release (TB) for 3 sec and then hold (TB) again
5)In about 5-8 sec RST will show in the left corner
6)Release and then hold again 15000 will show, press and release
7)Car is now reset to the 15,000 service – (has completed 10,000 mile service) and will count down from 15,000.

Oil service reset Chevrolet GMC Trucks Acadia

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet GMC Trucks Acadia. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet GMC Trucks Acadia, oil reset instructions:

2007

With Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Press the MODE button until the DIC reads OIL LIFE LEFT/HOLD SET TO RESET.
Press and hold the SET button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

With Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Press the vehicle information button (i) until OIL LIFE REMAINING displays.
Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P) to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Mercedes Benz M – Class

Leave a reply

Reset service light indicator, engine oil life Mercedes Benz M – Class, year: 1998-2004, oil reset instructions:

Switch ignition on and immediately press knob to left of speedometer twice within 1 second.
Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again.
Continue to hold button until you hear a signal. Release button.
The service interval should now display the reset interval.