Tag Archives: time

Oil reset service light Mitsubishi Lancer Sportback

Leave a reply

How to reset oil service light Mitsubishi Lancer Sportback (CX_A).

Reset oil service light Mitsubishi Lancer Sportback. From years: 2008, 2009, 2010.

  1. The “- – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – -” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light Mitsubishi Lancer Evolution X

Leave a reply

How to reset oil service light Mitsubishi Lancer Evolution X.

Reset oil service light Mitsubishi Lancer Evolution X. From years: 2008, 2009, 2010.

  1. The “- – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – – ” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light Mitsubishi Lancer Evolution 10

Leave a reply

How to reset oil service light Mitsubishi Lancer Evolution 10.

Reset oil service light Mitsubishi Lancer Evolution 10. From years: 2008, 2009, 2010.

  1. The “- – – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – – – ” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light indicator Chevrolet Malibu

Leave a reply

How do you reset oil service light Chevrolet Malibu. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Reset oil service light Chevrolet Malibu.

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation accurs where you change the oil prior to a CHANGE OIL SOON message being turned on, reset the system.

To reset oil service light on your vehicle Chevrolet Malibu follow this steps:

  • Display OIL LIFE RESET on the dash board.
  • Press and hold the INFO button & ENTER button (in the same time) buttons for at least one second.
  • OIL LIFE RESET will display.
  • Hit ENTER button again and an ACKNOWLEDGED display message will appear for three seconds.
  • This tells you the system has been reset.
  • Turn the key to LOCK/OFF.

If the CHANGE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Reset fill coolant fluid indicator Saab 9-3

Leave a reply

How to reset fill coolant fluid indicator Saab 9-3 first generation.

Reset fill coolant fluid indicator Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the vehicle.
  2. The fill coolant fluid indicator light cannot be removed by pressing CLEAR button.
  3. To reset this warning light push the brake pedal to clear.

Coolant Saab 9-3. The expansion tank is transparent, to facilitate checking. The level must be a little under the mark ”KALT – COLD” on the tank when the engine is cold. If the SID message “FILL COOLANT FLUID” is displayed, the level in the expansion tank should be checked. Top up as necessary with equal parts of clean water and coolant. Use only coolant approved by Saab. If the expansion tank is empty when coolant is added, run the engine to normal temperature and top up again, as necessary. All information how to reset fill coolant fluid indicator on a Saab 9-3 is taken from owners manual.

Coolant Saab 9-3. The cooling system is filled at the factory with coolant containing a 50% concentration of a combined antifreeze and corrosion inhibitor. A weaker mixture will result in reduced anticorrosion protection. For protection against freezing in very cold weather, a stronger concentration will be needed. A 60% concentration of antifreeze will provide protection at temperatures down to -58 F (-50°C). The corrosion-inhibiting properties of the coolant deteriorate over time, but coolant approved by Saab can be used for year-round protection. Change the coolant as specified in the service program (page 215) and use only coolant approved by Saab – other makes may need changing more frequently and may damage the system.