How do you reset service light indicator Toyota Yaris Year 2011, 2012, 2013
1. Start the engine.
2. Ensure trip meter A reading is shown. Turn ignition off.
3. While holding down the display change button turn the ignition to run (one position before starting engine).
4. Continue to press and hold the button until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
How do you reset maintenance light, reset service light indicator Mercedes Sprinter, year 2000, 2001, 2002, 2003, 2004. For reset maintenance light and that can be made manually by use button on car dashboard.
To reset the 2000 Mercedes Sprinter Maintenance Light, please follow these instructions:
How do you reset maintenance light, reset service light indicator GMC Yukon. For reset maintenance light and that can be made manually by use button on car dash board.
Reset service light indicator, engine oil life GMC Yukon, oil reset instructions:
year 2000-2006
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
year 2007-2013
1. Turn the ignition to run (one position before starting engine).
2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
3. Press and hold the SET/RESET (check mark) button on the DIC , or the trip odometer reset stem if vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.
How do you reset maintenance light, reset service light indicator GMC Terrain. For reset maintenance light and that can be made manually by use button on car dash board.
Reset service light indicator, engine oil life GMC Terrain, oil reset instructions:
year 2010-2013
With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then press SET/CLR (check button) to select.
3. Use up or down arrow to select YES to reset.
4. Confirm reset by pressing SET/CLR button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Engine Oil Soon message goes off the system is reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
How do you reset maintenance light, reset service light indicator GMC Savana Van. For reset maintenance light and that can be made manually by use button on car dash board.
Reset service light indicator, engine oil life GMC Savana Van, oil reset instructions:
year 2003-2009
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
year 2010-2013
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.