Tag Archives: run

Oil reset service light indicator Jeep Compass

Leave a reply

How do you reset maintenance light, reset service light indicator Jeep Compass, year 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Compass, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light Cadillac Allante

Leave a reply

How do you reset oil service light Cadillac Allante. From years: 1989, 1990, 1991, 1992, 1993.

Reset oil service light Cadillac Allante. From years: 1989, 1990, 1991, 1992, 1993.

  • Turn the ignition to run (one position before starting engine).
  • Press the range button until the OIL LIFE INDEX is displayed.
  • Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
  • Turn the ignition to off and start engine to verify the indicator has been reset.

Reset washer fluid low message Saab 9-3

Leave a reply

How to reset washer fluid low message Saab 9-3 first generation.

Reset washer fluid low message Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Switch ignition to ON position, one position befor you start the engine.
  2. The brake light failure warning light cannot be removed by pressing CLEAR button.
  3. To reset the message push the brake pedal to clear.

All information how to reset washer fluid low message on a Saab 9-3 it’s taken from Saab 9-3 owners manual.
Washer Saab 9-3. The reservoir holds 5 quarts (4.7 litres). When the SID message “WASHER FLUID LEVEL LOW” appears there is about 1.5 quarter (1.4 litres) left. Fill with quality washer fluid and follow the instructions on the package to reduce the risk of freezing. If the reservoir is run dry and the car has a rear-window wiper, then after refilling you cannot wash the rear window until you have first washed the windscreen.

Reset oil service light Saab 9-5

Leave a reply

How to reset oil service light Saab 9-5.

Reset oil service light Saab 9-5. From year: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

  1. Turn the ignition to run, one position before starting the vehicle.
  2. You can clear the reset service oil message by pressing CLEAR once.
  3. Reset by pressing CLEAR for at least eight seconds, until time for SERVICE appears on the display.
  4. Turn the ignition off and then start the vehicle to verify the indicator has been reset.
  5. The warning light can only be deleted when it is shown on the Service Indicator Display (SID).

A time for service message will illuminate on the Saab Instrument Display (SID) when the car is due for regular maintenance.

Engine oil and filter changes Saab 9-5. Changing the engine oil and filter is required at every service point. Use only a Saab approved long-life oil filter and engine oils stated in the Specification section of this Owner’s Manual. The use of extra additives in the oil is not necessary and is not recommended, and may be harmful to turbochargers. More frequent oil changes are recommended if your vehicle is operated under the following conditions:

  1. Most trips are less than 5 to 10 miles (8 to 16 km). This is particularly important when outside temperatures are below freezing.
  2. Most trips include extensive idling (such as frequent stop-and-go driving).
  3. Most trips are through dusty areas.
  4. You frequently tow a trailer or use a carrier on top of your vehicle.
  5. If the vehicle is used for delivery service, police, taxi or other commercial applications.

If your driving habits match this description, have the engine oil and filter changed inbetween normal services at 5,000 mile (8,000 km) intervals. The Saab Warranty and Service Record Booklet has provisions to record extra oil changes.

Reset oil service light indicator Chevrolet Corvette

Leave a reply

Reset service light indicator, engine oil life Chevrolet Corvette, year: 1982-2010, oil reset instructions:

Reset oil service light indicator Chevrolet Corvette. Corvette C3 and C4 from years: 1982, 1983, 1984, 1985, 1986, 1987,  1988, 1989, 1990, 1991.  Corvette C4 from years: 1992, 1993, 1994, 1995, 1996. Corvette C5 from years: 1997, 1998, 1999, 2000. Corvette C6 and C5 from years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset reset oil service light indicator Chevrolet Corvette. 

Third generation Chevrolet Corvette C3 and fourth generation Chevrolet Corvette C4.

From years: 1982, 1983, 1984, 1985, 1986, 1987,  1988, 1989, 1990, 1991.

  1. Turn the ignition to run, one click before starting. Press ENG/MET button and release. Then press ENG/MET button again within 5 seconds.
  2. Within 5 seconds of step 1. Press and hold the RANGE button until the change oil indicator begins to flash.
  3. Hold RANGE button until indicator stops flashing and goes out, about 10 seconds.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

How to reset reset oil service light indicator Chevrolet Corvette. 

Reset oil service light indicator Chevrolet Corvette C4, fourth generation.

From years: 1992, 1993, 1994, 1995, 1996.

  1. Turn the ignition to run, one position before starting engine.
  2. Press ENG MET button on the trip monitor and release. Then press and release again within 5 seconds.
  3. Within 5 seconds of step 2, press and hold GAUGES button on trip monitor.
  4. Hold GAUGES button until change oil lamp stops flashing and goes out.
  5. Turn the ignition off and then start the engine. Now you can to verify if the indicator has been reset.

The full procedure how to reset oil service light indicator Chevrolet Corvette.

Reset oil service light indicator Chevrolet Corvette C5, fifth generation.

From years: 1997, 1998, 1999, 2000.

  1. Turn the ignition to run, one position before starting engine.
  2. Press the TRIP button on the DIC switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the % of oil life remaining.
  3. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the % of oil life remaining as 99 percent.
  4. Turn the ignition off and then start the engine. Now verify that the indicator has been reset.

 

How can you reset oil service light indicator Chevrolet Corvette.

Reset oil service light indicator Chevrolet Corvette C6 and Corvette c5.

From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

  1. Turn the ignition to run, one position before starting engine.
  2. Press the TRIP button so the oil life % is displayed.
  3. Press the RESET and hold for 2 seconds.  OIL LIFE REMAINING 100% will appear.
  4. Turn the ignition off and then start the engine. Now verify that the indicator has been reset.

 

That it is the full procedure how to reset oil service light Chevrolet Corvette. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Chevrolet cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.