How to reset oil service light RAM 1500.
Reset service light indicator, engine oil life RAM 1500, year 2008-2013 reset instructions:
MAINT REQD light can be reset by doing the following:
1. Press the “”ENGINE START STOP”” switch once (do not start the engine) or turn ignition key to run (one position before starting the engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. Press and hold the display change button and turn the ignition on (do not start the engine).
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
MAINT REQD light can be reset by doing the following:
1. Press the “”ENGINE START STOP”” switch once (do not start the engine) or turn ignition key to run (one position before starting the engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. Press and hold the display change button and turn the ignition on (do not start the engine).
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
How do you reset service light indicator Volkswagen Tiguan year 2010, 2011, 2012, 2013
1. Turn the ignition to run (one position before starting engine).
2. Press and HOLD the trip-odometer button “0.0”.
3. Turn your key to run (one position before starting engine).
4. Release the trip-odometer button.
5. Push and release the Clock Minute Set Button “min”.
or
2. Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 4-5.
or
3. Use the buttons on the right hand side of the multi function steering wheel
4. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.
How do you reset service light indicator Volkswagen Phaeton year 2003, 2004, 2005, 2006, 2007, 2008, 2009
1. Turn the ignition to run (one position before starting engine).
2. Press the VEHICLE button followed by SERVICE INTERVAL and follow the prompt to reset.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.