Tag Archives: oil reset instructions

Reset service light oil life indicator dashboard Cadillac CTS

Leave a reply

How do you reset maintenance light, reset service light indicator Cadillac CTS, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Cadillac CTS, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
    *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
  2. Press SEL on the DIC controls.
  3. Hold SEL down for a few seconds to reset the oil life to 100%.
  4. Turn the ignition off and start the engine to verify the indicator has been reset.
    *Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

Reset service light oil life indicator dashboard Buick Enclave

Leave a reply

How do you reset maintenance light, reset service light indicator Buick Enclave, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Buick Enclave, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
  3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
  4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Reset service light oil life indicator dashboard Ford Fiesta

Leave a reply

How do you reset maintenance light, reset service light indicator Ford Fiesta, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford Fiesta, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear.
  3. Release the brake and gas pedals.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Volkswagen Golf 6 oil reset service light indicator

Leave a reply

Reset maintenance light, reset service light indicator Volkswagen Golf 6, year  2013, 2014. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Volkswagen Golf 6, oil reset instructions:

  1. Get into the driver’s seat and make sure all the doors are closed
  2. Insert the ignition key
  3. With the ignition switched-off, press and hold the “0.0” button (it’s on the lower center portion of the dash)
  4. With the “0.0” button depressed, switch-on the ignition (but don’t start the engine)
  5. Once the ignition is turned-on, release the “0.0” button
  6. Press the “0.0” button again to reset the service reminder message.

Reset service light oil life indicator dashboard Chrysler 300

Leave a reply

How do you reset maintenance light, reset service light indicator Chrysler 300, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chrysler 300, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.”
  3. Push and release the RIGHT arrow button to access the ”Oil Life” screen.
  4. Push and hold the OK button until the “ Oil Life” screen displays.
  5. Push and release the DOWN arrow button to select “ Yes,” then push and release the OK button to select reset of the Oil Life.
  6. Push and release the Up arrow button to exit the submenu screen.
  7. Turn the ignition off and then start the vehicle to verify the indicator has been reset.