Tag Archives: oil maintenance warning

Reset service light oil life indicator Honda Insight

Leave a reply

Reset service light indicator, engine oil life Honda Insight, year 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 reset instructions:

2000-2005
Turn off the engine.
Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2006
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010
Turn the ignition to run (one position before starting engine).
If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

*Models equipped with the keyless access system have an engine start/stop button instead of an switch. ON Mode is equivalent of ignition (II).

Reset service light oil life indicator Honda CR-V

Leave a reply

Reset service light indicator, engine oil life Honda CR-V, year 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 reset instructions:

1997-1999
Insert ignition key into centre slot located on the front of the instrument cluster. When reset, the indicator changes to green.
2000-2001
Reset the coloured indicator by inserting your key in the slot beside the indicator.
2002-2006
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007-2010
Turn the ignition to run (one position before starting engine).
Press the SELECT/RESET knob repeatedly until the engine oil life is displayed.
Press the SELECT/RESET knob for about 10 seconds. The information display shows the reset mode initial display.
Select the ëëOIL LIFEíí indicator by turning the SELECT/RESET knob. The display begins to blink. Push the same knob to enter this setting.
The engine oil life and the maintenance item code(s) will begin to blink. Press the SELECT/ reset knob for another 5 seconds.
The maintenance item code(s) will disappear, and the engine oil life will reset to 100. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service light reset indicator Chevrolet Cobalt

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Cobalt 2005-2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Cobalt, oil reset instructions:

2005-2010

Turn the ignition to run (one position before starting engine).
Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu.
Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service light reset indicator Chevrolet Camaro

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Camaro 1999-2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Camaro, oil reset instructions:

1999-2002
Turn the ignition to run (one position before starting engine).
Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Acura ZDX

Leave a reply

Reset service light indicator, engine oil life, dashboard oil life indicator Acura ZDX year 2010, instructions for manually resetting the trip computer:

  • Turn the ignition to position 2 (do not start the engine).
  • Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
  • Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
  • Select reset by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition position 2.