Tag Archives: oil change

Reset VSC warning light Toyota Solara second generation

Leave a reply

Reset VSC warning light Toyota Solara second generation. From year: 2004, 2005, 2006, 2007, 2008.

How to reset VSC warning light Toyota Solara 2 generation.

The light warns that there is a problem somewhere in the vehicle stability control system or traction control system. The light will come on when the ignition key is turned to “ON”, and will go off after about a few seconds.

If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving.

In the following cases, contact your Toyota dealer:

  • The warning light does not come on after the ignition key is turned to “ON”.
  • The warning light remains on after the ignition key is turned to “ON”.
  • The warning light comes on while driving.

The “TRAC OFF” indicator light will come on when the “VSC” warning light comes on even if the “TRAC OFF” switch is not pushed.

All information how can you reset VSC warning light is taken from Toyota Solara second generation owners manual.

That it is the full procedure how to reset VSC warning light Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

How to check service reminder light Toyota Solara 2 generation

Leave a reply

How to check service reminder light Toyota Solara 2 generation. From year: 2004, 2005, 2006, 2007, 2008.

How can you check service reminder light Toyota Solara second generation.

CHECKING SERVICE REMINDER INDICATORS except the low fuel level warning light and low windshield washer fluid level warning ligh).

  1. Apply the parking brake.
  2. Open one of the doors. The open door warning light should come on.
  3. Close the door. The open door warning light should go off.
  4. Turn the ignition key to “ON”, but do not start the engine. All the service reminder indicators except the open door warning light should come on. The “ABS”, “VSC” and low tire pressure warning lights, engine oil replacement reminder light, “TRAC OFF” and slip indicator lights go off after a few seconds. The SRS warning light goes off after about 6 seconds.

If any service reminder indicator or warning buzzer does not function as described above, have it checked by your Toyota dealer as soon as possible.

All information how to check service reminder light is taken from Toyota Solara 2 generation owners manual.

That it is the full procedure how to check service reminder light Toyota Solara 2 generation Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset odometer and two trip meters Toyota Tacoma 2 generation

Leave a reply

Reset odometer and two trip meters Toyota Tacoma 2 generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset odometer and two trip meters Toyota Tacoma second generation.

Reset-odometer-and-two-trip-meters-Toyota-Tacoma-2-generation.

This meter displays the odometer and two trip meters.

  1. Odometer-Shows the total distance the vehicle has been driven.
  2. Two trip meters-Show two different distances independently driven since the last time each trip meter was set to zero. You can use one trip meter to calculate the fuel economy and the other to measure the distance on each trip. All trip meter data is cancelled if the electrical power source is disconnected.
  3. Trip meter reset knob-Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push. To reset the trip meter A to zero, display the meter A reading, then push and hold the knob until the meter is set to zero. The same process can be applied for resetting the trip meter B.

All information how to reset odometer and two trip meters is taken from Toyota Tacoma 2 generation owners manual.

That it is the full procedure how to reset odometer and two trip meters Toyota Tacoma 2 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Reset seat belt reminder light Toyota Tacoma second generation

Leave a reply

Reset seat belt reminder light Toyota Tacoma second generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset seat belt reminder light Toyota Tacoma 2 generation.

Driver’s seat belt reminder light and buzzer.

The light and buzzer act as a reminder to buckle up the driver’s seat belt. Once the ignition key is turned to “ON” or “START”, the reminder light flashes and buzzer sounds if the driver’s seat belt is not fastened. Unless the driver fastens the belt, the light continues flashing and the buzzer stops after about 4 to 8 seconds.

Front passenger’s seat belt reminder light.

The light acts as a reminder to have the front passenger buckle up the seat belt. Once the ignition key is turned to “ON” or “START”, the reminder light flashes if a passenger sits in the front passenger seat and does not fasten the seat belt. If luggage or other load is placed on the front passenger seat, depending on its weight, the reminder light may flash.

All information how can you reset seat belt reminder light is taken from Toyota Tacoma second generation owners manual.

That it is the full procedure how to reset seat belt reminder light Toyota Tacoma second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset charging system warning light Toyota Tacoma

Leave a reply

Reset charging system warning light Toyota Tacoma second generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset charging system warning light Toyota Tacoma 2 generation.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

The Toyota dealer will fix and reset this problem for you.

All information how to reset charging system warning light is taken from Toyota Tacoma owners manual.

That it is the full procedure how to reset charging system warning light Toyota Tacoma second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.