Tag Archives: indicator service oil

Oil service reset Mercury Montego

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Montego, year 2005, 2006, 2007. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2005-2007

  • Turn the ignition to run (one position before starting engine).
  • Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
  • Press RESET control to reset oil change.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Mercury Mountaineer

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Mountaineer, year 1999. 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 1999-2010

1999-2001

Turn the ignition to run (one position before starting engine).
press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2003

Turn the ignition to run (one position before starting engine).
Press the SETUP control to access the System Check function.
Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”.
Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”.
Press and hold the RESET control to display “OIL LIFE SET TO 100%”. Your oil life is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2004-2005

Turn the ignition to run (one position before starting engine).
Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
Press RESET control to reset oil change.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2006-2007

Turn the ignition to run (one position before starting engine).
Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

Turn the ignition to run (one position before starting engine).
Press SETUP to display OIL LIFE %.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Ford Trucks Explorer / Sport Trac

Leave a reply

How do you reset maintenance light, reset service light indicator Ford Trucks Explorer / Sport Trac. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford Trucks Explorer / Sport Trac, oil reset instructions:

2006-2007

Turn the ignition to run (one position before starting engine).
Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

Turn the ignition to run (one position before starting engine).
Press SETUP to display OIL LIFE %.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1999-2001

Turn the ignition to run (one position before starting engine).
press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2003

Turn the ignition to run (one position before starting engine).
Press the SETUP control to access the System Check function.
Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”.
Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”.
Press and hold the RESET control to display “OIL LIFE SET TO 100%”. Your oil life is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2004-2005

Turn the ignition to run (one position before starting engine).
Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
Press RESET control to reset oil change.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset the service oil light on Saab 9-7x

Leave a reply

Reset service light indicator, engine oil life Saab 9-7x, year 2005-2009 reset instructions:

2005-2009
Turn the ignition to run (one position before starting engine).
Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan GT-R

Leave a reply

2009-2010
Push the ignition switch to the ON position (do not start the engine). Use the ENTER switch and toggle the vehicle information display to show the SETTING screen. Use the NEXT switch to select
Use the NEXT switch to select MAINTENANCE, then confirm with ENTER switch to change to the oil maintenance menu (follow the insructions).
i) SETTING > MAINTENANCE > OIL > ENGINE OIL to set or reset the mileage for the engine oil change.
ii) SETTING > MAINTENANCE > FILTER > to set or reset the mileage for the engine oil filter.
Turn the ignition off and then start the engine to verify the indicator has been reset.