Tag Archives: How to reset

Reset low engine oil pressure warning light Toyota FJ Cruiser

Leave a reply

How to reset low engine oil pressure warning light Toyota FJ Cruiser.
Reset low engine oil pressure warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light warns that the engine oil pressure is too low.If it flickers or stays on while you are driving, pull off the road to a safe place and stop the engine immediately. Call a Toyota dealer or qualified repair shop for assistance. The light may occasionally flicker when the engine is idling or it may come on briefly after a hard stop. There is no cause for concern if it then goes out when the engine is accelerated slightly. The light may come on when the oil level is extremely low. It is not designed to indicate low oil level, and the oil level must be checked using the level dipstick. If this is the problem you can reset the low engine oil pressure warning light on your Toyota FJ Cruiser by adding the oil in your engine and the light will turn off.

Do not drive the vehicle with the warning light on-even for one block. It may ruin the engine.

Reset malfunction indicator lamp Toyota FJ Cruiser

Leave a reply

How to reset malfunction Indicator Lamp Toyota FJ Cruiser.

Reset malfunction Indicator Lamp Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This lamp comes on when the ignition key is turned to the “ON” position and goes off after the engine starts. This means that the warning light system is operating properly. If the lamp remains on, or the lamp comes on while driving, first check the followings.

Empty fuel tank. If the fuel tank is empty, refuel immediately.
Loose fuel tank cap If the fuel tank cap is loose, securely tighten it.
These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips. If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.

Contact your Toyota dealer as soon as possible to service the vehicle. If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system. At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible. Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the ignition key is turned to the “ACC” or “LOCK” position.

Be especially careful to prevent erroneous pedal operation.

Emissions inspection and maintenance (I/M) programs.

Your vehicle may not pass a state emission inspection if the malfunction indicator lamp remains on. Contact your Toyota dealer to check your vehicle’s emission control system and OBD (On−Board Diagnostics) system before taking your vehicle for the inspection. To reset this lamp need a special service tools.

All information how can you reset malfunction indicator lamp is taken from Toyota FJ Cruiser owners manual.

Reset low fuel level warning light Toyota FJ Cruiser

Leave a reply

How to reset low fuel level warning light Toyota FJ Cruiser.

Reset low fuel level warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light comes on when the fuel level in the tank becomes nearly empty. Fill up the tank as soon as possible. On inclines or curves, due to the movement of fuel in the tank, the low fuel level warning light may come on earlier than usual.

In case the light does not go out you have problems with the probe “litrometrica”.

All information how can you reset low fuel level warning light is taken from Toyota FJ Cruiser generation owners manual.

Reset open door warning light Toyota FJ Cruiser

Leave a reply

How to reset open door warning light Toyota FJ Cruiser.

Reset open door warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light remains on until all the side doors, back door and back window are completely closed.

To reset the open door warning light on a Toyota FJ Cruiser you must stop the car and close all doors. If the warning light don’t stop it means that at one door sensor is broken. Before starting check the doors and trunk are closed properly and no seatbelt is caught in doors.

Reset automatic transmission fluid temperature warning light Toyota FJ Cruiser

Leave a reply

How to reset automatic transmission fluid temperature warning light Toyota FJ Cruiser.

Reset automatic transmission fluid temperature warning light Toyota FJ Cruiser four−wheel drive models. From year: 2007, 2008, 2009, 2010, 2011.

This light warns that the automatic transmission fluid temperature is too high.

If this light comes on while you are driving, slow down and pull off the road. To reset the automatic transmission fluid temperature warning light on your Toyota FJ Cruiser you must follow this instruction : stop the vehicle at a safe place and put the selector lever in “P”. With the engine idling, wait until the light goes off. If the light goes off, you may start the vehicle again. If the light does not go off, call a Toyota dealer or qualified repair shop for assistance.